Notice ZANUSSI ZQA14030DA

Notice

---

ZANUSSI ZQA14030DA

© copyright ZANUSSI

Télécharger la notice

Extrait du mode d'emploi ZANUSSI ZQA14030DA

Les instructions détaillées pour l'utilisation figurent dans le Guide de l'utilisateur.

The correct operation can only be guaranteed within the specified temperature range. If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service Centre. ELECTRICAL CONNECTION CAUTION! Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING! This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed. The wires in the mains lead are coloured in accordance with the following code: 5 A B C D E • A - green and yellow: Earth • C - brown: Live • D - blue: Neutral As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1. Connect the wire coloured green and yellow to the terminal marked either with the letter “E“ or by the earth symbol yellow. or coloured green and 2. Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black. Connect the wire coloured brown to the terminal either marked with the “L“ or coloured red. Check that no cut, or stray strands of wire is present and the cord clamp (E) is secure over the outer sheath. Make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. Switch on the appliance. The appliance is supplied with a 13 amp fuse (B). In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used. WARNING! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely. VENTILATION REQUIREMENTS CAUTION! Refer to the assembly instructions for the installation. OPERATION SWITCHING ON 1. Insert the plug into the wall socket. Turn the Temperature regulator clockwise to a medium setting. SWITCHING OFF To turn off the appliance, turn the temperature regulator to the "O" position. TEMPERATURE REGULATION The temperature is regulated automatically. However, you can set a temperature inside the appliance yourself. [...] • Do not let hot items to touch the plastic parts of the appliance. • Do not store flammable gas and liquid in the appliance. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. • Do not touch the compressor or the condenser. They are hot. INTERNAL LIGHTING WARNING! Risk of electric shock. • The type of lamp used for this appliance is for household appliances only. Do not use it for house lighting. CARE AND CLEANING WARNING! Risk of injury or damage to the appliance. • • • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit. Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance. • • • SERVICE • To repair the appliance contact the Authorised Service Centre. Use original spare parts only. 4 • Please note that self-repair or non-professional repair can have safety consequences and might void the guarantee. • • • • • DISPOSAL WARNING! Risk of injury or suffocation. • Disconnect the appliance from the mains supply. Cut off the mains cable and discard it. Remove the door to prevent children and pets to be closed inside of the appliance. The refrigerant circuit and the insulation materials of this appliance are ozone-friendly. The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly. Do not cause damage to the part of the cooling unit that is near the heat exchanger. INSTALLATION WARNING! Refer to Safety chapters. WARNING! Refer to installation instruction document to install your appliance. WARNING! Fix the appliance in accordance with installation instruction document to avoid a risk of instability of the appliance. LOCATION To ensure best performance, install the appliance well away from sources of heat such as radiators, boilers, direct sunlight etc. Make sure that air can circulate freely around the back of the cabinet. POSITIONING Install the appliance in a dry, well ventilated indoors where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance. [...]..

Téléchargez votre notice ! Téléchargement gratuit et sans inscription de tous types de documents pour mieux utiliser votre réfrigérateur ZANUSSI ZQA14030DA : mode d'emploi, notice d'utilisation, manuel d'instruction. Cette notice a été ajoutée le Samedi 5 Mai 2020.